● Type: AGF-AE-D/200
● 35mm Din Rail Installation
● Single Phase Three Wire(1P3W)
● Rated voltage: AC120V/208V, 240V(88%~110%)
● Rated current: AC200A
● Communication: RS485, SunSpec protocol
● Application: inverters in Australia, Europe, North America and other areas
● Installed in the output of inverters, converters, controllers and interconnection system equipment for use with distributed energy resources.
General
In a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grade meter (RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM.
Specification
|
Type
|
Function Description
|
|
AGF-AE-D/200
|
1. power control for photovoltaic / energy storage system
2. full power measurement, high speed data refresh
3. din rail installed
4. easy install by 2 external split core current transformers 0-200A
|
Dimension
Meter Dimension（±0.5mm）
Current Transformer Dimension（±0.5mm）
Front Panel
Application
| Meter Electrical Service | Units | ||
| Type | AGF-AE-D/200 | ||
| Rated Voltage-Line to N | 120 | V | |
| Rated Voltage-Line to Line | 208/240 | V | |
| Extended Voltage Range | 88%~110% | ||
| AC Frequency | 60 | Hz | |
| Grids Supported | L1/L2/N/PE | ||
| Power Consumption | 1.2 | W | |
| Communication | |||
| Meter Communication Interfaces | RS485 | ||
| Response Time | ≤1 | S | |
| Meter Accuracy | |||
| Rated RMS current | 200 | A | |
| 1%-100% of CT Current | ±1 | % | |
| Current Transformer | |||
| Number of Supplied Current Transformer | 2 | ||
| Dimension |
70.5×54.5×39 (H×W×D) |
mm | |
| Standard Compliance | |||
| Safety | UL1741 | ||
| Installation Specification | |||
| Dimension (H×W×D) | 54.1×87.8×52 | mm | |
| Weight | 0.2 | kg | |
| Operating Temperature Range | -30~55 | ℃ | |
| Relative Humidity (noncondensing) | 5~90 | % | |
| Mounting Type | 35mm DIN-Rail |
|
|
