● Type: AGF-AE-D/100, AGF-AE-D/200
● DIN 35 mm
● Single phase three wire
● Rated voltage: AC120V/208V, 240V(88%~110%)
● Rated current: AC100A, 200A
● Communication: RS485, SunSpec protocol
● Application: inverters in Australia, Europe, North America and other areas
● Installed in the output of inverters, converters, controllers and interconnection system equipment for use with distributed energy resources.
General
In a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grade meter (RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM.
Structure
Dimension
Meter Dimension（±0.5mm）
Current Transformer Dimension（±0.5mm）
Wiring
Application
| Meter Electrical Service | Units | ||
| Type | AGF-AE-D/100 |
AGF-AE-D/200 |
|
| Rated Voltage-Line to N | 120 | V | |
| Rated Voltage-Line to Line | 208/240 | V | |
| Extended Voltage Range | 88%~110% | ||
| AC Frequency | 60 | Hz | |
| Grids Supported | L1/L2/N/PE | ||
| Power Consumption | 1.2 | W | |
| Communication | |||
| Meter Communication Interfaces | RS 485 | ||
| Response Time | ≤1 | S | |
| Meter Accuracy | |||
| Rated RMS current | 100 | 200 | A |
| 1%-100% of CT Current | ±0.5 | ±1 | % |
| Current Transformer | |||
| Number of Supplied Current Transformer | 2 | ||
| Dimensions | I.D:15 O.D:35 | 70.5×54.5×39(H×W×D) | mm |
| Standard Compliance | |||
| Safety | UL1741 | ||
| Installation Specification | |||
| Dimensions(H×W×D) | 54.1×87.8×52 | mm | |
| Weight | 0.2 | kg | |
| Operating Temperature Range | -30~55 | ℃ | |
| Relative Humidity (noncondensing) | 5-90 | % | |
| Mounting Type | DIN-Rail, 35mm |
|
|
