● Input signal: DC 0/4～20mA、0/1-5V、0/2-10V
● Output signal: DC 0/4~20mA, 0/1-5V, 0/2-10V, Active
● Conversion accuracy: ≤0.1%(F.S.)
● Power supply: 24V DC
● 35mm Din Rail Installation
● Compact size
General
Acrel BM800-VI/VI-11 is a signal isolator with a thickness of 6.2 mm and designed for DIN 35 mm rail mounting. It adopts a 1-in-1-out channel design and provides galvanic isolation among the input, output and power supply circuits. It isolates and converts DC input signals of 0/4-20 mA, 0/1-5 V and 0/2-10 V into DC output signals of 0/4-20 mA, 0/1-5 V and 0/2-10 V. Arbitrary combinations of signal conversion can be configured via DIP switches. The rated supply voltage is 24 V DC.
Dimension & Installation
Wiring
DIP Switch Configuration
Application
Photos on Site
Date Center & Building & Industrial Automation
|
Model |
BM800-VI/VI-11 |
|
Input Specifications |
|
|
Input channel |
1 |
|
Input signal |
DC 0/4～20mA、0/1-5V、0/2-10V |
|
Maximum Input Current |
DC 100mA |
|
Maximum Input Voltage |
DC 13V |
|
Maximum Input Impedance |
Current Input: 50 Ω; 0/1-5 V Input: 1 MΩ; 0/2- 10 V Voltage Input: 2 MΩ |
|
Output Specifications |
|
|
Output channel |
1 |
|
Available outputs |
DC 0/4~20mA, 0/1-5V, 0/2-10V (Active Signals) |
|
Max output current |
DC 40mA |
|
Max output Voltage |
DC 16V |
|
Output ripple |
≤50mVpp(@250Ω) |
|
Load capacity |
Current output ≤550Ω; Voltage output ≥10kΩ |
| Power Supply Parameters | |
| Nominal supply | 24V DC |
| Operating supply range | 20~35V DC |
| Power consumption | ≤2 W (Iout=20 mA, 24 V DC, 550 Ω load) |
| General Performance | |
| Conversion Accuracy | ≤0.1% (F.S.) |
| Temperature drift | 50ppm/℃ |
| Response time(10- 90%) | ≤5ms |
| Overvoltage category | Ⅱ |
| Pollution degree | 2 |
| Ingress protection | IP20 |
| Dielectric strength | 1.5kV AC, 50Hz, 60s (between input, output and power circuits) |
| Insulation resistance | 100MΩ |
| Overall dimension | W6.2mm × H97mm × D100mm |
| Weight | approx.70g |
| Mounting | DIN35 standard rail |
| Wiring Specifications | |
| Connection Type | Screw terminal connection |
| Solid single-core wire size | 0.5~2.5mm² |
| Stranded flexible wire size | 0.5~2.5mm² |
| AWG wire gauge | 20~ 13 |
| Wire stripping length | 8mm |
| Ambient Specifications | |
| Operating ambient temperature | -20~60℃ |
| Storage ambient temperature | -40~80℃ |
| Max operating altitude | ≤2000m |
| Relative ambient humidity | ≤95%RH, non-condensing |
